Service centre

On this page you find detailed video instructions for the right use of the MFS fog generator

A. Connecting units and devices

The MFS’ removable fog unit was specially developed for isolator technology.
That's why you can use both units separately from each other.

After only two steps you can easily place the fog unit in small gaps or attach it with the necessary fittings to the railings in your isolator.

01. Items delivered

02. Connect units

03. Connect devices

04. Separate connected units

B. Before you start

Before every operation you have to fill up the water tank with WFI. You should run the test system regularly.

05. Start device, fill water

06. Run Test System

C. Control and set up your MFS

You can control the functions of the MFS in 3 possible ways:

With the buttons next to the display
With the remote control
Or inside the menu, where you have access to more advanced settings, as well

Control device with buttons and display

How to use the remote control

07. Menu - Adjust Power

08. Menu - Adjust Flow

09. Menu - Turn pump on/off

10. Menu - Calibrate the water level sensor

11. Menu - Empty water tank and start drying

12. Menu - Check overall runtime

outdated-title!

outdated-desc.

outdated-link ×